Pioneer to launch new "DJM-900SRT Serato DJ Edition"

Design aims
Pioneer is launching the “DJM-900SRT Serato DJ Edition” DJ four channel mixer with an in-built Serato soundcard for native control of the hugely popular Serato DJ software.
DJs can connect the DJM-900SRT to their laptop via USB cable and use the included CONTROL DISC*1(CD/VINYL) to mix and scratch with Serato DJ’s four decks, without the need for an external sound card*2. The DJM-900SRT inherits all the high-performance features of the DJM-900nexus, including six Sound Color FX, thirteen Beat FX with intuitive X-PAD control that allows the DJ to manipulate multiple parameters simultaneously.
Plus, PRO DJ LINK enables DJs to connect the mixer via a LAN cable to compatible CDJs to access Serato DJ Beatgrid information and hit the Quantize button to sync FX to the master BPM.

Main features
1)Built-in Serato sound card for plug-and-play connectivity with Serato DJ
The DJM-900SRT is equipped with an internal Serato certified sound card. The included CONTROL DISC for CD or VINYL enables mixing and scratching with up to four CDJs or turntables without the need for external hardware.
2)Studio-quality Sound Color FX to make creative vision a reality
The DJM-900SRT puts six mind-bending Sound Color FX at DJs fingertips. The mixer boasts 13 channel assignable BEAT FX to mash up the music in sync with the BPM for ultimate control. The DJM-900SRT is equipped with in intuitive X-PAD, a touch-sensitive strip that allows DJs to simultaneously engage BEAT FX while adjusting the parameters.

EFFECT functions


3)Advanced design for accurate reproduction of audio sources
The DJM-900SRT is equipped with the same high-quality audio input and output circuits as Pioneer’s flagship DJM-2000nexus. A 32-bit A/D converter digitizes and enhances sound quality for all outputs, while the 32-bit digital signal processor (DSP) suppresses digital noise. Even analogue noise is reduced, through balanced hybrid operation amps and output circuits.
4)High-performance faders “MAGVEL CROSS FADER” for enhanced durability and operability
The DJM-900SRT is perfect for tough club environments, thanks to two metal shafts supporting the fader knobs and an exclusive magnetic cross fader construction that can be used more than 10 million times – nearly three times more than the DJM-750. The fader mechanism is positioned to one side, rather than directly beneath the fader faceplate opening, minimizing the damage from liquid or dust getting inside, while the Pioneer P-LOCK Fader Caps are impossible to pull off in the heat of a mix. The operational load, fader curve and cut lag can be adjusted to suit DJ’s preference.
5) PRO DJ LINK functionality enhances performance possibilities
The DJM-900SRT can be connected via a single LAN cable to CDJs that support PRO DJ LINK to access rekordbox™ BPM and Beatgrid information and keep the effects in perfect time*3. Even if the BEAT FX timing has slipped, PRO DJ LINK automatically syncs the effects to the beat.
6) Other features
• Peak limiter eliminates distortion on the master output, even at high volume.
• Fully assignable MIDI*4 functionality can transmit most control information to external devices and can also be used as a MIDI controller.
• MIDI LFO signal output that changes at beat-by-beat intervals.
• Built-in switchable 3-band equalizer (+6dB to -26dB) and 3-band isolator (-6dB to -∞dB).
• Automatically switches to standby if unit is not used or there is no input for a pre-set period of time.

Main specifications
Software Serato DJ
Number of channels 4 audio channels, 2 mic channels
Input ports CD/LINE×4 (RCA), PHONO×4 (RCA)
MIC X 2 (front panel XLR & 1/4 inch jack dual purpose x 1, 1/4 inch jack x 1)
Output ports MASTER OUT×2 (RCA×1, XLR×1)
BOOTH OUT×1 (1/4 inch jack)
HEADPHONE MONITOR OUT×1 (front panel 1/4 inch jack x 1)
Other ports SEND×1 (1/4 inch jack), RETURN×1 (1/4 inch jack)
MIDI OUT×1 (5-Pin DIN), USB B port×1, LINK port×1(LAN)
Sampling rate 96 kHz
D/A converter 32 bit (MASTER D/A converter)
A/D converter 24 bit
Frequency response 20 Hz – 20 kHz
Total Harmonic Distortion ratio 0.004% or less
S/N ratio 107dB or greater (CD/LINE)
Head room 19 dB
Maximum dimensions 331 mm (W) × 404 mm (D) × 108 mm (H)
Unit weight 7.1 kg

Serato DJ System Requirements
Applicable OS (Windows) Windows® 7
32-bit: (CPU) 2.0 GHz Core 2 Duo, (Memory) 2GB
64-bit: (CPU) 2.4 GHz Core 2 Duo, (Memory) 4GB
Applicable OS (Mac) Mac OS X v10.8.4/10.7.5/10.6.8
32-bit: (CPU) 2.0 GHz Core 2 Duo, (Memory) 1GB
64-bit: (CPU) 2.4 GHz Core 2 Duo, (Memory) 4GB
Display resolution 1,280 x 720 or higher resolution